Fiber Optic Modem







BFOM
Tactical Shelters
The Fiber Optic Modem (FOM) provides electrical to optical conversion of electronic communication and data signals for transmission using tactical fiber optic cable assemblies. The FOM simultaneously receives incoming optical signals and converts them back to the original electronic signal allowing for full duplex transmission. Together with the tactical fiber optic cables, the FOM provides a rugged, secure, and easy deployable optical link. The FOM is available in both single and multi-channel configurations and can be mounted on the signal entry panel (SEP) of tactical shelters, in 19” racks or placed on the ground (multi-channel versions only). Current models include MD-1272/G, Eurocom D/1 Interface B, E3 and DS3.

The FOM allows users to replace existing coaxial cable communication links with lightweight fiber optic cable. The advantages of using fiber optic cable is as follows:

Lighter weight and smaller size for much quicker deployment.
Fiber Optic Modem
Higher bandwidth for increased throughput
Lower loss for long distance repeaterless communication up to 16 kilometers
Better quality-safe from electromagnetic interference from any source
More secure - no electromagnetic signature
Less expensive

All of the above impact defense mobility and rapid deployment requirements.

Applications
Interconnect Tactical Communication Assemblages including:
 

• Radio Terminals
• Radio Repeaters
• Tactical Switches
• Circuit Switches

• Tactical Multiplexers
• Satellite Support
Radios
• TACC Shelters



Tactical Communication Systems
Down the Hill Links
Intra-Node Cabling
Dispersed Command Post
Digital Orderwire Equipment

Tactical Shelter


Benefits of Optical Fiber Over Coax Implementation
Click Image to Enlarge

Benefits


Tactical Fiber Optic Modems
U.S. Army and ANSI Standards

(596 KB)
Tactical Fiber Optic Modems
EuroCom D/1 and ITU Standards

(629 KB)

These data sheets contain Controlled Technical Data that has been cleared for Public
Release by the U.S. Government under ITAR Exemption 22 CFR 125.4(b)(13).

05/14/08 Copyright© 2008 Moog Components Group. All rights reserved · email: mcg@moog.com